To date all of the runs i have made have used static stabiliser wheels welded to the end of quite wide outrigger arms, which is great for...

just a short early video taken from the cockpit to show the view, this time still being towed. dramatic sky, it was windy!

So the weather was too windy last week to run with the bodywork on or to allow me to fire the parachute for the first time, so today we...

Just a short video clip of the bike moving under her own engine power and the car chasing after. i was supposed to just stick in first to...

I can make all the excuses you like, but after over a year i finally took the bike back to the runway for testing and boy did i have a...

Ok, so it's the week of Speedweek in Utah, and I'm confined to the UK, but I've got the project underway again. Visited my chassis...

Some of you will remember that i took the quick route to constructing the bodywork, using a bamboo cane and chicken wire frame, covered...

For some time i have been working on how to activate the parachute release from the tilt switch, and finally, all the parts came...

Trying to find somewhere that will accept an 18 foot long 2 stroke motorcycle to put on their dyno is a bit of an issue, car dynos could...

On Wednesday last week i went to the runway to test the Monet sidecar to see if it ran straight and true, should have been running the...

We have a schedule of testing to do on the 11th which includes towing the streamliner down a local runway to check i can still keep it...

Have finally got round properly installing the master kill switch for the battery, and always wanted it to be discreet and not disrupting...

Whist talking with one of my sponsors, Langham Engineering, the lovely Alice piped up with, "You know we have a rolling road down at the...

I finally collected the modified exhaust pipe from favourite tuner Mick Abbey, i gave him the old pipe and a bent piece of plumbers...

Having spent many many hours, soldering on nipples, routing cables, refining gear levers and foot controls, the gearchange was at best...

One of the aspects of the engine development that i have never been happy about is that the engine has a redundant kickstart...

Been working on the gear change for the last few days and decided on cable as it was simple to understand and relatively cheap, and i...

the idea was to find a source of stored gas that would activate the parachute air cylinder when the solenoid was triggered by the tilt...

The original airbox on the dyno testing was a huge 10 litres in size and an ugly square aluminium box, which might suit a dyno room but...

Well i suppose it a snapshot of fame, well a local radio channel really, but interviewed twice on air and hopefully this will lead to...